Antirotazione ad asta scanalata AR
AR Anti-Rotation System
AR Anti-Rotation System
AR Anti-Rotation System
AR Anti-Rotation System
AR Anti-Rotation System
AR Anti-Rotation System
AR Anti-Rotation System
AR Anti-Rotation System
AR Anti-Rotation System
AR Anti-Rotation System
AR Anti-Rotation System
AR Anti-Rotation System
AR Anti-Rotation System
Specifications
The AR Anti-Rotation system consists of a full-length channel milled into the translating trapezoidal screw and a special collar with a key mounted on the cover of the Screw Jack: the fixed key slides along the channel, preventing the trapezoidal screw from rotating. Please keep in mind that the milled channel causes a mechanical weakening of the trapezoidal screw resulting in a 40% reduction of the dynamic load capacity and a 13% reduction of the static load capacity. Additionally, because of the milled channel, it is recommended to use the AR Anti-Rotation system only when the Fa factor is <1. Finally, because the AR Anti-Rotation system locks the screw and the end-fitting in a specific position, it is always necessary to specify the exact position of special holes or asymmetrical/non-centered details in the trapezoidal screw.
The AR Anti-Rotation system consists of a full-length channel milled into the translating trapezoidal screw and a special collar with a key mounted on the cover of the Screw Jack: the fixed key slides along the channel, preventing the trapezoidal screw from rotating. Please keep in mind that the milled channel causes a mechanical weakening of the trapezoidal screw resulting in a 40% reduction of the dynamic load capacity and a 13% reduction of the static load capacity. Additionally, because of the milled channel, it is recommended to use the AR Anti-Rotation system only when the Fa factor is <1. Finally, because the AR Anti-Rotation system locks the screw and the end-fitting in a specific position, it is always necessary to specify the exact position of special holes or asymmetrical/non-centered details in the trapezoidal screw.
The AR Anti-Rotation system consists of a full-length channel milled into the translating trapezoidal screw and a special collar with a key mounted on the cover of the Screw Jack: the fixed key slides along the channel, preventing the trapezoidal screw from rotating. Please keep in mind that the milled channel causes a mechanical weakening of the trapezoidal screw resulting in a 40% reduction of the dynamic load capacity and a 13% reduction of the static load capacity. Additionally, because of the milled channel, it is recommended to use the AR Anti-Rotation system only when the Fa factor is <1. Finally, because the AR Anti-Rotation system locks the screw and the end-fitting in a specific position, it is always necessary to specify the exact position of special holes or asymmetrical/non-centered details in the trapezoidal screw.
The AR Anti-Rotation system consists of a full-length channel milled into the translating trapezoidal screw and a special collar with a key mounted on the cover of the Screw Jack: the fixed key slides along the channel, preventing the trapezoidal screw from rotating. Please keep in mind that the milled channel causes a mechanical weakening of the trapezoidal screw resulting in a 40% reduction of the dynamic load capacity and a 13% reduction of the static load capacity. Additionally, because of the milled channel, it is recommended to use the AR Anti-Rotation system only when the Fa factor is <1. Finally, because the AR Anti-Rotation system locks the screw and the end-fitting in a specific position, it is always necessary to specify the exact position of special holes or asymmetrical/non-centered details in the trapezoidal screw.
The AR Anti-Rotation system consists of a full-length channel milled into the translating trapezoidal screw and a special collar with a key mounted on the cover of the Screw Jack: the fixed key slides along the channel, preventing the trapezoidal screw from rotating. Please keep in mind that the milled channel causes a mechanical weakening of the trapezoidal screw resulting in a 40% reduction of the dynamic load capacity and a 13% reduction of the static load capacity. Additionally, because of the milled channel, it is recommended to use the AR Anti-Rotation system only when the Fa factor is <1. Finally, because the AR Anti-Rotation system locks the screw and the end-fitting in a specific position, it is always necessary to specify the exact position of special holes or asymmetrical/non-centered details in the trapezoidal screw.
The AR Anti-Rotation system consists of a full-length channel milled into the translating trapezoidal screw and a special collar with a key mounted on the cover of the Screw Jack: the fixed key slides along the channel, preventing the trapezoidal screw from rotating. Please keep in mind that the milled channel causes a mechanical weakening of the trapezoidal screw resulting in a 40% reduction of the dynamic load capacity and a 13% reduction of the static load capacity. Additionally, because of the milled channel, it is recommended to use the AR Anti-Rotation system only when the Fa factor is <1. Finally, because the AR Anti-Rotation system locks the screw and the end-fitting in a specific position, it is always necessary to specify the exact position of special holes or asymmetrical/non-centered details in the trapezoidal screw.
The AR Anti-Rotation system consists of a full-length channel milled into the translating trapezoidal screw and a special collar with a key mounted on the cover of the Screw Jack: the fixed key slides along the channel, preventing the trapezoidal screw from rotating. Please keep in mind that the milled channel causes a mechanical weakening of the trapezoidal screw resulting in a 40% reduction of the dynamic load capacity and a 13% reduction of the static load capacity. Additionally, because of the milled channel, it is recommended to use the AR Anti-Rotation system only when the Fa factor is <1. Finally, because the AR Anti-Rotation system locks the screw and the end-fitting in a specific position, it is always necessary to specify the exact position of special holes or asymmetrical/non-centered details in the trapezoidal screw.
The AR Anti-Rotation system consists of a full-length channel milled into the translating trapezoidal screw and a special collar with a key mounted on the cover of the Screw Jack: the fixed key slides along the channel, preventing the trapezoidal screw from rotating. Please keep in mind that the milled channel causes a mechanical weakening of the trapezoidal screw resulting in a 40% reduction of the dynamic load capacity and a 13% reduction of the static load capacity. Additionally, because of the milled channel, it is recommended to use the AR Anti-Rotation system only when the Fa factor is <1. Finally, because the AR Anti-Rotation system locks the screw and the end-fitting in a specific position, it is always necessary to specify the exact position of special holes or asymmetrical/non-centered details in the trapezoidal screw.
The AR Anti-Rotation system consists of a full-length channel milled into the translating trapezoidal screw and a special collar with a key mounted on the cover of the Screw Jack: the fixed key slides along the channel, preventing the trapezoidal screw from rotating. Please keep in mind that the milled channel causes a mechanical weakening of the trapezoidal screw resulting in a 40% reduction of the dynamic load capacity and a 13% reduction of the static load capacity. Additionally, because of the milled channel, it is recommended to use the AR Anti-Rotation system only when the Fa factor is <1. Finally, because the AR Anti-Rotation system locks the screw and the end-fitting in a specific position, it is always necessary to specify the exact position of special holes or asymmetrical/non-centered details in the trapezoidal screw.
The AR Anti-Rotation system consists of a full-length channel milled into the translating trapezoidal screw and a special collar with a key mounted on the cover of the Screw Jack: the fixed key slides along the channel, preventing the trapezoidal screw from rotating. Please keep in mind that the milled channel causes a mechanical weakening of the trapezoidal screw resulting in a 40% reduction of the dynamic load capacity and a 13% reduction of the static load capacity. Additionally, because of the milled channel, it is recommended to use the AR Anti-Rotation system only when the Fa factor is <1. Finally, because the AR Anti-Rotation system locks the screw and the end-fitting in a specific position, it is always necessary to specify the exact position of special holes or asymmetrical/non-centered details in the trapezoidal screw.
The AR Anti-Rotation system consists of a full-length channel milled into the translating trapezoidal screw and a special collar with a key mounted on the cover of the Screw Jack: the fixed key slides along the channel, preventing the trapezoidal screw from rotating. Please keep in mind that the milled channel causes a mechanical weakening of the trapezoidal screw resulting in a 40% reduction of the dynamic load capacity and a 13% reduction of the static load capacity. Additionally, because of the milled channel, it is recommended to use the AR Anti-Rotation system only when the Fa factor is <1. Finally, because the AR Anti-Rotation system locks the screw and the end-fitting in a specific position, it is always necessary to specify the exact position of special holes or asymmetrical/non-centered details in the trapezoidal screw.
The AR Anti-Rotation system consists of a full-length channel milled into the translating trapezoidal screw and a special collar with a key mounted on the cover of the Screw Jack: the fixed key slides along the channel, preventing the trapezoidal screw from rotating. Please keep in mind that the milled channel causes a mechanical weakening of the trapezoidal screw resulting in a 40% reduction of the dynamic load capacity and a 13% reduction of the static load capacity. Additionally, because of the milled channel, it is recommended to use the AR Anti-Rotation system only when the Fa factor is <1. Finally, because the AR Anti-Rotation system locks the screw and the end-fitting in a specific position, it is always necessary to specify the exact position of special holes or asymmetrical/non-centered details in the trapezoidal screw.
The AR Anti-Rotation system consists of a full-length channel milled into the translating trapezoidal screw and a special collar with a key mounted on the cover of the Screw Jack: the fixed key slides along the channel, preventing the trapezoidal screw from rotating. Please keep in mind that the milled channel causes a mechanical weakening of the trapezoidal screw resulting in a 40% reduction of the dynamic load capacity and a 13% reduction of the static load capacity. Additionally, because of the milled channel, it is recommended to use the AR Anti-Rotation system only when the Fa factor is <1. Finally, because the AR Anti-Rotation system locks the screw and the end-fitting in a specific position, it is always necessary to specify the exact position of special holes or asymmetrical/non-centered details in the trapezoidal screw.